- Sean-NTN Driveshaft CORP.
- GERMANY FAG Bearing GERMANY SKF Bearing ITALY SKF Bearing
English
Home>Products>ITALY SKF Bearing>SKF SE 213 ITALY Bearing
SKF SE 213 MODELS
Need a CAD or 3D Model?
SKF SE 213 ITALY Bearing
category
ITALY SKF Bearing
SKF SE 213 Bearing SPECIFICATIONS
What are the dimensions of a SKF SE 213 ITALY Bearing? ITALY SKF Bearing Manufacturing Service . Get Your Free, Instant Yes (with retaining Bearing Retained Quote！ Sean-NTN Driveshaft CORP.
- SKF
SE 213
- Yes (with retaining
- VV (Non-Contact Rubb
- Single
- 15
- 57
- Available
- Not Provided
- Bearings with Housin
-
Sean-NTN Driveshaft CORP.2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
Interchange guide SKF SE 213 ITALY Bearing
- Yes (with retaining
- VV (Non-Contact Rubb
- Single
- 15
- 57
- Available
- Not Provided
- Bearings with Housin
- Square Type
- 6
SKF SE 213 Product Identifiers SKF SE 213 ITALY Bearing
SKF SE 213 bearing Size Chart (mm/inches) | |
|---|---|
| Engineering Group | Mounted Bearing |
| Bearing Number | 22222 |
| Shaft Size | 3-3/4 in |
| Shaft Size Type | Imperial |
| Full Timken Part Number | QVVPA22V312SB |
| Locking Style | Double V-Lock |
| Weight | 84 lb |
| Housing Style | Two-Bolt Pillow Block |
| UPC Code | 0883450146845 |
| Dimension A | 4.94 in |
| Dimension B | 9.47 in |
| Dimension C | 5.5 in |
| Dimension D Max | 14.50 in |
| Dimension D Min | 12.50 in |
| Dimension F | 16.00 in |
| Dimension G | 3.960 in |
| Dimension H | 2.00 in |
| Dimension J (Bolt Size) | 0.875 in |
| Dimension L | 4.55 in |
| Dimension RVV | 0.59 in |
| Dimension SVV | 5.13 in |
| C - Dynamic Load (Basic) | 125000 lb |
| C0 - Static Load | 147000 lb |
| e - Geometry Factor | 0.25 |
| Y1 - Geometry Factor | 2.73 |
| Y2 - Geometry Factor | 4.06 |
| Oil Lubrication - M/N Seal | 900 rpm |
| Oil Lubrication - T Seal | 1700 rpm |
| Oil Lubrication - B/C/O Seal | 600 rpm |
| Grease Lubrication - M/N Seal | 900 rpm |
| Grease Lubrication - T Seal | 1200 rpm |
| Grease Lubrication - B/C/O Seal | 600 rpm |
| Float | 0.083 in |
| Shaft Tolerance | 0.0030 in |
| Eng Internal Radial Clearance - Min | 0.0053 |
| Eng Internal Radial Clearance - Max | 0.0067 |
| Pre Install Clearance Min | 0.0053 in |
| Pre Install Clearance Max | 0.0067 in |
SKF SE 213 INTERCHANGE
ITALY SKF Bearing Part series SE 213 is a potential replacement for these common bearing part numbers:
SE 213
SE 213
SE 213
SE 213
SE 213
SE 213
SE 213
SE 213
Contact Us
- Sean-NTN Driveshaft CORP.
- Address578 Courtneypark Drive West, Mississauga,Ontario, L6W 1Y4, Canada
- Phone(Working Time)+1-955-594-2758
- Fax
SKF SE 213 Technical Articles
| How do you check tapered clearance on a roller bearing? |
| How do you know if your trailer axle is bad? |
| How often should I grease my trailer bearings? |
SKF 1204 K ITALY Bearing 20×47×14
SKF 1204 ETN9/C3 ITALY Bearing 20x47x14
20 mm x 47 mm x 14 mm SKF 1204 ETN9 ITALY Bearing 20×47×14
20 mm x 47 mm x 14 mm SKF 1204 ETN9 ITALY Bearing 20*47*14
17 mm x 40 mm x 12 mm SKF 1203ETN9 ITALY Bearing 17*40*12